Mechanical Property의 측정으로 여러 Solder 재료들을 비교해 보겠다.
먼저 Solder Ball과 PCB 기판과의 접착력 Test를 위해 Mechanical Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품
properties
인장 강도의 측정은 재료에 인장응력을 가해 견디는 강도를 측정한 것이다. 인장응력은 온도의 영향을 많이 받기 때문에 실험은 모든 재료가 같은 온도 하에서 실시되어야 한다. 또한 극한 UTS 측정시에는 온도와 Strain rate를 함께 고려하여야 한다.
3. Shear properties
Shear Property인 Shear Modulus
In describing the answer to the question below, try to share your opinions on the basis of evidences such as articles and books. Also provide information of the evidence (author, title, journal name, etc.).
1. Explain what happens in terms of mechanical/chemical properties when making products using metal-based 3D additive manufacturing technology. (10 points)mechanical properties
전통적
Water-soluble material-shaving aid material
Molecular weights 에 따라Liquid 또는 low-melting solid 상태로 존재
Physical Properties
Tg= -67oC
Low toxicity
Non-Toxic
의약품, 스킨로션 등
기계적 성질이 안 좋아서 다른 고분자나 이온성 물질과 blend 또는 합성하여 사용
Glass Transition Phenomena
액체를 냉각할 때 물질 고유의 온도
1 GPa
Elastic modulus Nanoindentation > 6 GPa
Adhesion Tape pull, modified-edge lift-off Delamination-free
Disavantages
Weakens mechanical properties
Lower thermal conductivity
Narrow pore distribution to ensure dielectric constant is homogeneous and isotropic
Pores need to be closed cells to prevent crack propagation and moisture absorption
Need to add silica to seal surface pores
2. 1. 그래핀의 제법
그래핀을 얻는 방법은 크게 물리적 방법과 화학적 방법으로 나눌 수 있다.
물리적 방법은 바로 graphitic material로부터 박리하는 방법이다.
접착성이 있는 테이프 위에 흑연조각을 올리고 테이프를 한번 접었다 떼면 접착성에 의해 흑연이 묻어나와 둘로 나뉜다. 이렇게 붙였다 떼
properties of cruciferous vegetables, most active isothiocyanate is sulfor-aphane.
Dosage: 500 to 2000mgs daily in divided oral dose.
Sprouts contain 20 to 50 times more sulforaphane in much greater quantity than mature broccoli.
Boiling reduce the levels of anti-cancer compounds in broccoli
Safety - No toxic data available, generally considered safe for appications and as vegetables
4. List two mechanisms of oil absorption during frying foods.
→ 튀김의 메커니즘은 매우 간단하다. 열 전달과 물질의 이동(heat and mass transfer)으로 표현할 수 있는데, 가열된 튀김유는 식품으로 열을 전달해 주는 열 전달 매체로 작용한다. 식품에 전달된 열은 식품 속의 물을 수증기로 변화시키고 지방을 녹여낸다. 수
mechanical trauma, cytokines and growth factors, etc. Conversionof arachidonic acid to prostanoid endproducts is carried out by cyclooxygenases (COX), also known as prostaglandin H synthase (PGHS), at two different sites on the enzyme.
Arachidonic acid is initially cyclized and oxidized to the endoperoxide PGG2 at the cyclooxygenase site of the COX and the product then reduced to a second endop
Flow around and through fish gills
Jeesoon Choi and Dongyeop Baek
School of Mechanical and Aerospace Engineering, Seoul National University
Abstract. An overall view of the flow over the fish gills is first described by using the active pump system and the passive ram ventilation. The concept of ram ventilation is introduced and its merits of reducing hydrodynamic drags and efficient e